Curved Inclined Drag Conveyor Standards

9 x 9 Inclined Drag Conveyor
Capacity BPH Bushels Per Hour - a US measure of volume.
RPM Revolutions Per Minute
FPM Feet Per Minute
Conveyor Wt.
HP
Class I Drive
Wt.
Class II Steady load not exceeding Motor HP rating for over 10 hours a day. Moderate shock loads are allowable during 10 hours a day. Drive
Wt.
500
21
47
1353
3
090533
190
090534
215
1000
42
93
1353
3
091032
140
091032
140
1500
63
139
1353
3
091531
120
091532
140
2000
84
185
1353
5
092052
140
092052
140

The MODEL 9 x 9 conveyor includes the following standard features: 10 ga. Galvanized head section, 10 ga. Galvanized tail section with screw take-up, pillow block bearings, hardened tooth sprockets, trough with all bolted construction has 12 ga. Galvanized sides, 10 ga. Galvanized bottom and 12 ga. HR middle pan, all welded steel chain with heat-treated pins and 30,000 lb. average ultimate strength, and 1/2" thick UHMW Ultra High Molecular Weight plastic - impact and abrasion resistant, and self lubricating. drag flights factory bolted to chain.

12 x 12 Inclined Drag Conveyor
Capacity BPH
RPM
FPM
Conveyor Wt.
HP
Class I Drive
Wt.
Class II Drive
Wt.
2000
33
101
1729
5
122053
190
122054
215
2500
41
126
1729
5
122553
190
122553
190
3000
49
151
1729
5
123052
140
123053
190

The MODEL 12 x 12 conveyor includes the following standard features: 10 ga. Galvanized head section, 10 ga. Galvanized tail section with screw take-up, pillow block bearings, hardened tooth sprockets, trough with all bolted construction has 10 ga. Galvanized sides, 10 ga. Galvanized bottom and 10 ga. HR middle pan, all welded steel chain with heat-treated pins and 30,000 lb. average ultimate strength, and 1/2" thick UHMW drag flights factory bolted to chain.

17 x 17 Inclined Drag Conveyor
Capacity BPH
RPM
FPM
Conveyor Wt.
HP
Class I Drive
Wt.
Class II Drive
Wt.
4000
28
99
2350
7.5
174074
215
174075
270
5000
36
124
2350
7.5
175074
215
175075
270
6000
43
149
2350
7.5
176073
190
176074
215
7000
50
174
2350
10
177104
215
177105
270

The MODEL 17 x 17 conveyor includes the following standard features: 10 ga. Galvanized head section, 10 ga. Galvanized tail section with screw take-up, pillow block bearings, hardened tooth sprockets, trough with all bolted construction has 10 ga. Galvanized sides, 7 ga. HR painted steel overlapping bottom and 10 ga. HR middle pan, all roller bushed steel chain with all parts heat-treated and 44,000 lb. average ultimate strength, and 1/2" thick UHMW drag flights factory bolted to chain.

24 x 20 Inclined Drag Conveyor
Capacity BPH
RPM
FPM
Conveyor Wt.
HP
Class I Drive
Wt.
Class II Drive
Wt.
7000
21
106
4124
10
247105
270
247106
350
8000
24
121
4124
15
248156
350
248157
550
9000
27
136
4124
15
249156
350
249157
550
10000
30
152
4124
15
241156
350
241156
350

The MODEL 24 x 20 conveyor includes the following standard features: 7 ga. painted head section, 7 ga. painted tail section with screw take-up, pillow block bearings, hardened tooth sprockets, trough with all bolted construction has 10 ga. Galvanized sides, 7 ga. HR painted steel middle pan, and overlapping bottom, all roller bushed steel chain with all parts heat treated and 44,000 lb. average ultimate strength, and 1/2" thick UHMW drag flights factory bolted to chain.

32 x 20 Inclined Drag Conveyor
Capacity BPH
RPM
FPM
Conveyor Wt.
HP
Class I Drive
Wt.
Class II Drive
Wt.
10000
22
110
5185
15
321006
350
321007
550
12500
28
138
5185
15
321256
350
321256
350
15000
33
165
5185
20
321506
350
321507
550

The MODEL 32 x 20 conveyor includes the following standard features: 7 ga. painted head section, 7 ga. painted tail section with screw take-up, pillow block bearings, hardened tooth sprockets, trough with all bolted construction has 10 ga. Galvanized sides, 7 ga. HR painted steel middle pan, and overlapping bottom, double row of all roller bushed steel chain with all parts heat treated and 44,000 lb. average ultimate strength, and 1/2" thick UHMW drag flights factory bolted to chain.

 

ALL PRICES AND ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.